|
邮箱:sd_nuoya@163.com
E-Mail: sd_nuoya@163.com
- 产品初检流程：
- Primary Testing Process:
一.封箱胶带、封箱钉是否完好；包装箱是否损坏严重。
Whether or not the adhesive tape or nails are good; whether or not the packing boxes are seriously damaged.
二.检查包装箱上是否有说明附有配件。
Check whether or not there are instructions and accessories in the packing boxes.
三.检查箱内附件是否齐全。
Check whether or not the accessories in the packing boxes are all complete.
1、车体上挂有合格证
Certification hanging on the bicycle body
2、包装袋
Packing bag
3、铃铛
Handle-bar bell
4、车座
Saddle
5、脚踏
Pedals
6、充电器
Battery charger
7、说明书
Instruction
8、附件箱
Accessory case
9、LOGO按钮、开口扳手、保修卡、反光片（14寸，16寸车内独有）
LOGO button, open spanner, warranty card, reflectors(only 14 inches, 16inches electric bicycles)
四.车体有无划伤。
Whether or not there are scrapes on the bicycle body.
五.确认产品组装折叠顺利无阻碍。
Affirm whether or not the assembly and folding are smooth and unimpeded.
六.检查电动车启动是否正常。
Check whether or not the start of the electric bicycle works normally.
七.前灯和电量显示灯是否显示正常。
Check whether or not the front light and power light work normally.
八.产品各固定螺丝是否松动。
Whether or not the set screws of the product are loosened.
九.将车重新包装好放置箱内或摆放为样品。
Repackage the electric bicycle and put it in the box or place it as a sample.
十.产品初检为合格。
The primary testing is qualified. | 
